Journal Article

Bulte, DP and Langman, RA, ‘Origins of the magnetomechanical effect’, Journal of Magnetism and Magnetic Materials, 251 (2) pp. 229-243. ISSN 0304-8853 (2002) [Refereed Article]

Gale, TJ and Johnston, PR* and Kilpatrick, D, ‘Efficient boundary element method solution of potential problems that are large, linear and involve optimization of boundary geometry’, Communications in Numerical Methods in Engineering, 18 (9) pp. 827-834. ISSN 1069-8299 (2002) [Refereed Article]

Hoang, TA and Nguyen, DT, ‘Improving training of radial basis function network for classification of power quality disturbances’, Electronics Letters, 38 (17) pp. 976-977. ISSN 0013-5194 (2002) [Refereed Article]

Hoang, TA and Nguyen, DT, ‘Optimal learning for patterns classification in RBF networks’, Electronics Letters, 38 (20) pp. 1188-1190. ISSN 0013-5194 (2002) [Refereed Article]

Holloway, DS and Davis, MR, ‘Green Function Solutions for the Transient Motion of Water Sections’, Journal of Ship Research, 46 (2) pp. 99-120. ISSN 0022-4502 (2002) [Refereed Article]

Huang, JS and Negnevitsky, M and Nguyen, DT, ‘A Neural-Fuzzy Classifier for Recognition of Power Quality Disturbances’, IEEE Transactions on Power Delivery, 17 (2) pp. 609-616. ISSN 0885-8977 (2002) [Refereed Article]

Karri, V and Bullen, F, ‘Project Based Learning - Formula SAE Car Development as an Effective Tool’, New Engineer, 4 (4) pp. 23 - 24. ISSN 1440-785X (2002) [Refereed Article]

Kelareva, GV and Negnevitsky, M, ‘Multi-Layered Genetic Algorithm for Maintenance Scheduling with Multiple Parameters’, Australian Journal of Intelligent Information Processing Systems, 7 (3/4) pp. 122-131. ISSN 1321-2133 (2002) [Refereed Article]

Melerski, ES, ‘Numerical analysis for environmental effects in circular tanks’, Thin-Walled Structures, 40 (7-8) pp. 703-727. ISSN 0263-8231 (2002) [Refereed Article]

Sargison, JE and Guo, SM* and Oldfield, MLG* and Lock, GD* and Rawlinson, AJ*, ‘A Converging Slot-Hole Film-Cooling Geometry-Part 1: Low-Speed Flat-Plate Heat Transfer and Loss’, Transactions of the ASME: Journal of Turbomachinery, 124 (3) pp. 453-460. ISSN 0889-504X (2002) [Refereed Article] [Full Text]

Sargison, JE and Guo, SM* and Oldfield, MLG* and Lock, GD* and Rawlinson, AJ*, ‘A Converging Slot-Hole Film-Cooling Geometry-Part 2: Transonic Nozzle Guide Vane Heat Transfer and Loss’, Transactions of the ASME: Journal of Turbomachinery, 124 (3) pp. 461-471. ISSN 0889-504X (2002) [Refereed Article] [Full Text]

Book

Bullen, F and Rebecchi, J* and Youdale, G*, Selection and Design of Flexible Pavements, Australian Asphalt Pavement Association, Melbourne, pp. 68. (2002) [Authored Other Book]

Negnevitsky, M, Artificial Intelligence: A Guide to Intelligent Systems, Addison-Wesley/Pearson Education, Harlow, England, pp. 394. ISBN 0201-71159-1 (2002) [Authored Other Book]

Chapter in Book

Doe, PE, ‘Fish drying’, Safety and quality issues in fish processing, Woodhead Publishing Limited and CRC Press, HA Bremner (ed), Cambridge, England, pp. 350-359. ISBN 1 85573 552 0 (2002) [Research Book Chapter]

Cybulska, B* and Doe, PE, ‘Water and Food Quality’, Chemical and Functional Properties of Food Components, CRC Press, ZE Sikorski (ed), Boca Raton, Florida, USA, pp. 25-50. ISBN 1-58716-149-4 (2002) [Edited Book Chapter]

Conference Publication

Bullen, F and Karri, V, ‘Design and construction of a formula SAE racecar in a teaching and research framework’, Proceedings of Annual International HERDSA Conference: Research and Development in Higher Education, Perth, Australia, pp. 74-82. ISBN 0 908557 51 5 (2002) [Refereed Conference]

Bullen, F, ‘Designing for Creep in FRC Material’, Proceedings of 2nd World Engineering Congress - Civil & Structural Engineering (Special Volume), Kuching, Sarawak, Malaysia, pp. 86-92. ISBN 967-960-141-2 (2002) [Refereed Conference]

Bullen, F and Karri, V and Rossmanek, P*, ‘Formula SAE Racing, Research and Project Based Learning’, Proceedings of 2nd World Engineering Congress - Engineering Education, Training & Policy, Kuching, Sarawak, Malaysia, pp. 201-207. ISBN 967-960-143-9 (2002) [Refereed Conference]

Bullen, F, ‘Predicting Creep performance of cellulose fibre reinforced concrete’, Proceedings of 27th Conference on Our World in Concrete & Structures: Conference Documentation Volume XXI, Singapore, pp. 185-192. ISBN 981-04-5825-8 (2002) [Refereed Conference]

Colville, EJ, ‘An Introduction to Management as Part of an Engineering Course - The Ingredients and the Process’, Proceedings of 9th Asia-Pacific Conference of Engineering Management Educators, Brisbane, Australia, pp. 12-16. ISBN 1 86435 590 5 (2002) [Refereed Conference]

Cousins, BF and Melerski, ES, ‘Analysis of Sheet-Piles under Conditions of Soil Elasticity’, Proceedings of 2nd World Engineering Congress - Geotechnical Engineering & Transportation, Kuching, Sarawak, Malaysia, pp. 93-99. ISBN 967-960-142-0 (2002) [Refereed Conference]

Frost, F* and Karri, V, ‘Selecting Intelligent Tools for Maintenance and Control of aluminum Reduction Cells’, Proceedings of the 3rd Asia Pacific Conference on Systems Integrity and Maintenance (Systems Integrity and Maintenance - ACSIM 2002), Cairns, Australia, pp. 110-114. ISBN 1 86435 589 1 (2002) [Refereed Conference]

Gale, TJ and Bullen, F, ‘Collaborative Learning in Robotic Engineering’, Proceedings of 13th Annual Conference for Australasian Association for Engineering Education and 8th Australasian Women in Engineering Forum, Canberra, Australia, pp. 81-85. (2002) [Refereed Conference]

Gale, TJ and Karri, V, ‘Modern mechatronic curriculum for multidisciplinary engineering education’, CDRom - Proceedings of 9th IEEE International Conference on Mechatronics and Machine Vision in Practice, Chiang Mai, Thailand, pp. 369-374. ISBN 962-442-228-1 (2002) [Refereed Conference]

Hoang, TA and Nguyen, DT, ‘A Comprehensive Training for Wavelet-Based RBF Classifier for Power Quality Disturbances’, Proceedings of 2002 IEEE Region 10 Conference on Computers, Communications, Control and Power Engineering, Beijing, China, pp. 1919-1922. ISBN 0-7803-7490-8 (2002) [Refereed Conference]

Hoang, TA and Nguyen, DT, ‘Matching Pursuit for the Recognition of Power Quality Disturbances’, Proceedings of the 33rd Power Electronics Specialists Conference, Cairns, Australia, pp. 1791-1796. ISBN 0-7803-7262-X (2002) [Refereed Conference]

Hoang, TA and Nguyen, DT, ‘Training Radial Basis Function Networks for Wavelet-based Classification of Power Quality Disturbances’, Proceedings of the Fourth IASTED International Conference: Signal and Image Processing, Kaua'i, Hawaii, USA, pp. 218-223. ISBN 0-88986-340-7 (2002) [Refereed Conference]

Hoang, TA and Nguyen, DT, ‘Wavelet-Based Classification of Power Quality Disturbances using Radial Basis Function Networks’, Proceedings of the IASTED International Conference: Power and Energy Systems, Marina del Rey, California, USA, pp. 282-287. ISBN 0-88986-326-1 (2002) [Refereed Conference]

Karri, V and Butler, DA, ‘An Intelligent Traction Controller’, CD - Proceedings of the HiPC 2002 Workshop on Soft Computing, Bangalore, India, pp. 55-61. (2002) [Refereed Conference]

Karri, V and Kiatcharoenpol, T, ‘Prediction of Internal Surface Roughness in Drilling using Three Feedforward Neural Networks - A Comparison’, CDRom Proceedings of 9th International Conference on Neural Information Processing, Singapore EJ ISBN 981-04-7525-X (2002) [Refereed Conference]

Karri, V and Cunningham, HJ, ‘Prediction of parameters to avoid vehicle roll over using artificial neural networks’, CDRom - Proceedings of 9th IEEE International Conference on Mechatronics and Machine Vision in Practice, Chiang Mai, Thailand, pp. 375-380. ISBN 962-442-228-1 (2002) [Refereed Conference]

Karri, V and Kiatcharoenpol, T, ‘Prediction of Thrust and Torque in Drilling Using Conventional and an Optimised Layer by Layer Neural Network’, Proceedings of the 3rd Asia Pacific Conference on Systems Integrity and Maintenance (Systems Integrity and Maintenance - ACSIM 2002), Cairns, Australia, pp. 178-183. ISBN 1 86435 589 1 (2002) [Refereed Conference]

Karri, V and Bullen, F, ‘Promoting Independent Learning and Postgraduate Training through Formula SAE Race Car Project’, Proceedings of 9th Asia-Pacific Conference of Engineering Management Educators, Brisbane, Australia, pp. 191-196. ISBN 1 86435 590 5 (2002) [Refereed Conference]

Karri, V and Kiatcharoenpol, T, ‘Radial force and hole oversize prediction in drilling using traditional and neural networks’, Proceedings of the International Conference on Manufacturing Automation: Rapid Response Solutions to Product Development, Hong Kong, China, pp. 159-167. ISBN 1 86058 376 8 (2002) [Refereed Conference]

Karri, V and Palaniswami, M* and Kiatcharoenpol, T, ‘Support Vector Machines to Estimate Thrust and Torque in Drilling’, CD - Proceedings of the HiPC 2002 Workshop on Soft Computing, Bangalore, India, pp. 75-80. (2002) [Refereed Conference]

Karri, V and Butler, DA, ‘Using Artificial Neural Networks to Predict Vehicle Acceleration and Yaw Angles’, CDRom Proceedings of 9th International Conference on Neural Information Processing, Singapore, pp. 5 pages. ISBN 981-04-7525-X (2002) [Refereed Conference]

Kelareva, GV and Negnevitsky, M, ‘Multi-Layer Genetic Algorithm for Maintenance Scheduling in Power Systems’, Proceedings of the Second IASTED International Conference: Power and Energy Systems, Crete, Greece, pp. 32-37. ISBN 0-88986-336-9 (2002) [Refereed Conference]

Melerski, ES and Cousins, BF, ‘Bending Analysis of Retaining Walls in Contact with Elastic Soil’, Proceedings of 2nd World Engineering Congress - Geotechnical Engineering & Transportation, Kuching, Sarawak, Malaysia, pp. 100-106. ISBN 967-960-142-0 (2002) [Refereed Conference]

Negnevitsky, M and Reznik, L*, ‘Applications of Neuro-Fuzzy Systems for Recognition and Reduction of Power Disturbances’, Proceedings of the Sixth IASTED International Conference: Software Engineering and Applications, Cambridge, USA, pp. 57-62. ISBN 0-88986-323-7 (2002) [Refereed Conference]

Ng, SK and Carter, SJB and Bullen, F, ‘Assessing the Environmental Performance of Civil Construction Projects’, CD Proceedings of the National Urban Infrastructure Forum 2002, Brisbane, Queensland, Australia, pp. 6 pages. (2002) [Refereed Conference]

Potter, C and Negnevitsky, M, ‘An Expert System Application for Hydro Electric Generator Scheduling in Tasmania’, CD Proceedings of Australasian Universities Power Engineering Conference (AUPEC) AUPEC2002: Producing Quality Electricity for Mankind, Melbourne, Australia EJ ISBN 0-7326-2206-9 (2002) [Refereed Conference]

Reznik, L* and Negnevitsky, M, ‘A Neuro-Fuzzy Method of Power Disturbances Recognition and Reduction’, CD Proceedings of the 2002 IEEE International Conference on Fuzzy Systems, Honolulu, Hawaii, pp. 1517-1522. ISBN 0-7803-7280-8 (2002) [Refereed Conference]

Sargison, JE and Bullen, F and McCulloch, JW, ‘Development of a cross discipline, experiential based, flexible delivery unit’, CD-Proceedings of International Conference on Engineering Education - ICEE 2002, Manchester, UK, pp. 1-4. (2002) [Refereed Conference]

Sargison, JE and Lock, GD* and Guo, SM* and Oldfield, MLG* and Rawlinson, AJ*, ‘Flow Visualisation of a converging Slot-Hole Film-Cooling Geometry’, CD-Proceedings of ASME Turbo Expo 2002, Amsterdam, The Netherlands, pp. 1-9. ISBN 0-7918-3601-0 (2002) [Refereed Conference]

Stephenson, G* and Bullen, F, ‘Predicting Fatigue Performance of Stone Mastic Asphalt’, Proceedings of 2nd World Engineering Congress - Civil & Structural Engineering (Special Volume), Kuching, Sarawak, Malaysia, pp. 79-85. ISBN 967-960-141-2 (2002) [Refereed Conference]

Stephenson, G* and Bullen, F, ‘The design, creep and fatigue performance of Stone Mastic Asphalt’, CD-Proceedings of the 9th International Conference on Asphalt Pavements, Copenhagen, Denmark EJ (2002) [Refereed Conference]

Thomas, GA and Davis, MR and Holloway, DS and Roberts, T*, ‘Extreme Asymmetric Slam Loads on Large High Speed Catamarans’, Proceedings of the 6th Symposium on High Speed Marine Vehicles, Castello di Baia, Italy, pp. I.15-I.23. (2002) [Refereed Conference]

Holloway, DS and Davis, MR, ‘Application of Two Dimensional Boundary Element Methods to Ship Motion Predictions’, Sydney, Australia, pp. 6 pages. (2002) [Non Refereed Conference]

Ng, SK and Carter, SJB, ‘Assessing the Environmental Performance of Civil Construction Projects: The ABT Railway Project’, CD Proceedings of the Engineering a Sustainable Future Conference, Hobart, Australia, pp. 8 pages. (2002) [Non Refereed Conference]

Sargison, JE and Walker, GJ and Denne, A*, ‘Influence of Surface Roughness caused by Biofilm Growth on Hydroelectric Power System Water Conveying Efficiency’, CD Proceedings of the Engineering a Sustainable Future Conference, Hobart, Australia, pp. 8 pages. (2002) [Non Refereed Conference]

Whelan, JR and Davis, MR and Holloway, DS, ‘Micro-VOF: An Improved Free Surface Tracking Algorithm for Unsteady Free Surface Flow Problems’, Sydney, Australia, pp. 2 pages. (2002) [Conference Extract]